ECO cutter for UZ29 SPEEDER
The cutter is designed for UZ29 SPEEDER
The cutter can be re-sharped
Suitable for conventional steel
Product Description
Expected
life and the recommended care for the tool:
intended for machining by rotary shear are designed for materials with the maximum strength of Rm up to 600 MPa / 87.022 PSI.
the compliance with all conditions specified in the instruction manual, the tool life may be up to 4.000 m / 13.123 ft and more.
Reallisticaly the life is about 2.000 – 3.000 m / 6.561 – 9.842 ft. A tool life is unfluenced by several factors:
Material and its preparation
already mentioned i tis necessary to adhere to the maximum strength of the machined material.
bevelling materials with higher than allowable strength the tool life rapidly decreases, but there is also a risk of the destruction of the tool or damaging the drive unit.
tool life can also be affected by the proparation of the material before machining. If the material at your workshop is cut by burning, you shoud clean the edges intended for bevelling by angle grinder.
burning, especially when plasma burning, edges of the material might be little bit hardened.
can have a significant impact on the ultimate tool life.
Care for tool
the maintenance of the tool and especially the care for the tool has significant influence on the life of the tool.
During bevelling, it is important to check sharpness of the tool on a regular basis and if it is blund, it is necessary to sharpen it immediately.
you continue to work with a blunt tool chipping or destruction of the tool might occur.
Working procedure
the machining procedure is important. This is thoroughly described in the instruction manual. Generally, when implementing the maximum possible reductions (bevel edge width) machining must be divided into two cuts.
whole issue is describec in detail in the machine user manual.
- suitable for conventional ECO cutting tool
- suitable for conventional steel
- 2 + 1 free set
intended for machining by rotary shear are designed for materials with the maximum strength of Rm up to 600 MPa / 87.022 PSI.
the compliance with all conditions specified in the instruction manual, the tool life may be up to 4.000 m / 13.123 ft and more.
Reallisticaly the life is about 2.000 – 3.000 m / 6.561 – 9.842 ft. A tool life is unfluenced by several factors:
Material and its preparation
already mentioned i tis necessary to adhere to the maximum strength of the machined material.
bevelling materials with higher than allowable strength the tool life rapidly decreases, but there is also a risk of the destruction of the tool or damaging the drive unit.
tool life can also be affected by the proparation of the material before machining. If the material at your workshop is cut by burning, you shoud clean the edges intended for bevelling by angle grinder.
burning, especially when plasma burning, edges of the material might be little bit hardened.
can have a significant impact on the ultimate tool life.
Care for tool
the maintenance of the tool and especially the care for the tool has significant influence on the life of the tool.
During bevelling, it is important to check sharpness of the tool on a regular basis and if it is blund, it is necessary to sharpen it immediately.
you continue to work with a blunt tool chipping or destruction of the tool might occur.
Working procedure
the machining procedure is important. This is thoroughly described in the instruction manual. Generally, when implementing the maximum possible reductions (bevel edge width) machining must be divided into two cuts.
whole issue is describec in detail in the machine user manual.
- suitable for conventional ECO cutting tool
- suitable for conventional steel
- 2 + 1 free set
Need Customization?
We can customize machines according to your specific industrial requirements.